undefined
undefined
+
  • undefined
  • undefined

Page View: 1000

WAGO 770-1115 blue 5-pole plug

Model/Number: 770-1115

Manufacturer Part Number:

Brand merchants: WAGO

Product series:

Weight

0

Quantity
-
+

Remaining stock

9999

隐藏域元素占位

Product Inquiry

Category: Waterproof connector
Keyword: Waterproof connector  |  Wieland RST16i5

The WAGO 770/771 series of pluggable connectors/plugs with 5 poles is a pluggable solution suitable for control cabinets, PCBs, or lighting connections.
  • Product Description
    • Commodity name: WAGO 770-1115 blue 5-pole plug
    • Commodity ID: 770-1115
    • Manufacturer Part Number: WAGO770-1115
    • Brand: WAGO
    • Product series: WAGO 770 series
    • Main functions: The WAGO 770/771 series of pluggable connectors/plugs with 5 poles is a pluggable solution suitable for control cabinets, PCBs, or lighting connections.

    Electrical Parameters

     

    Rated electrical parameters refer to IEC/EN standards

     

     

    Rated electrical parameters IEC/EN 60664-1
    Rated voltage (III/3)  400V
    Rated surge voltage (III/3)  6kV
    Rated current  25A
    Figure (Rated electrical parameters) (III / 3) ≙ Overvoltage category III/Pollution degree 3

     

    Rated electrical parameters refer to UL 1977 standard

     

    Rated voltage UL 1977  600V
    Rated current UL 1977  23A

     

     

    General

     

    Contact resistance description Approximately 1 mΩ contact resistance
    Approximately 0.25 mΩ plug/socket contact transition resistance

     

     

    Wiring parameters

     

    Total number of connection points  10
    Total number of potentials  5
    Grounding function Protruding grounding pin

     

     

    Connection 1

     

    Connection technology Push-in CAGE CLAMP® ® )
    Execution type Operating tool
    Push-in
    Rated conductor cross-section 4 mm² / 12 AWG
    Solid wire 0.5 … 4 mm² / 20 … 12 AWG
    Solid wire; can be inserted directly 1.5 … 4 mm² / 16 … 12 AWG
    Stranded wire 0.5 … 2.5 mm² / 20 … 14 AWG
    Fine stranded wire 0.5 … 4 mm² / 20 … 12 AWG
    Fine stranded wire; with insulated crimp connector 0.25 … 1.5 mm² / 20 … 16 AWG
    Fine stranded wire; with uninsulated crimp connector 0.25 … 2.5 mm² / 20 … 14 AWG
    Fine stranded wire; with crimp connector; can be inserted directly 1.5 mm² / 16 AWG
    Stripping length 9 mm / 0.35 inches
    Number of poles  5
    Angle between cable entry direction and assembly direction

     

     

    Physical data

     

    Pin spacing 10 mm / 0.394 inches
    Width 50 mm / 1.969 inches
    Height 12.9 mm / 0.508 inches
    Depth 37.5 mm / 1.476 inches

     

     

    Mechanical parameters

     

    Application DALI, lighting management
    Mismating protection I
    Customer-defined mismating pin No
    Marking DA+ DA- L ⏚ N
    Potential marking DA+ DA- L ⏚ N
    Insertion force of the connector Approximately 20–70 N (depending on the number of poles)
    Retention force of the connector Locked: > 80 N
    Withdrawal force of the connector Unlocked: Approximately 20 … 70 N (depending on the number of poles)
    Number of mating cycles 200, without resistive load
    Protection class IP20; only in plugged state and when using cable gland IP2xC (this compact connector is not suitable for use in open air or easily accessible areas).

     

     

    Plug-in connection

     

    Contact type (plug-in connector) Pin connector/plug
    Connector (connection type) Suitable for wires
    Mismating protection Yes
    Mismating prevention instructions All WINSTA ® Components are 100% mismating proof:
    a.) Incorrect number of poles inserted
    b.) 180° reversed insertion
    c.) Lateral misalignment during insertion
    d.) Single-pole insertion
    Locking catch Self-installable
    Plug-in connection locking device Locking catch
    Notes on the locking system All fixed-mount connectors (embedded versions for luminaires or devices, or all products for PCB connection and switchgear mounting) are supplied with a locking catch to ensure secure locking of the plug and socket. Free-standing installation requires an additional locking catch (plug/socket).

     

     

    Material parameters

     

    Color Blue
    Housing color Gray
    Insulation material group I
    Insulation material Nylon (PA 66)
    UL94 flammability rating V0
    Clamping spring material Chrome nickel spring steel (CrNi)
    Contact material Copper or copper alloy (surface treatment)
    Contact plating Tin-plated
    Fire load 0.393MJ
    Weight 15.7g

     

     

    Environmental requirements

     

    Maximum continuous operating temperature 85°C
    Operating temperature -5 … +40 °C
    Continuous operating temperature -35 … +85 °C
    Continuous operating temperature note Insulation part applicable temperature ≤ 105 °C

     

     

    Commercial data

     

    Production group 20 (Winsta)
    eCl@ss 10.0 27-44-06-05
    eCl@ss 9.0 27-44-06-05
    ETIM 8.0 EC002560
    ETIM 7.0 EC002560
    PU (SPU) 50 pieces
    Packaging type Box-shaped
    Country of origin of German sales organization DE